Parts

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •4 finger •205g pair

• Aluminum clamp with a chromoly bolt

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

- Replacement cable anchor bolt for brakes - Includes nut and washer

- American style BB for older 3-piece cranks - American BB for 3-piece cranksets - Fits 68mm American frames - Steel construction - Weight: 517 grams - Shell: 68mm - Interface: 24 tpi - Spindle Type: SQR JIS - Cup Material: Steel

Pile on the comfort on all your rides by upgrading to Sunlite's awesome Backrest Saddle. It fits on standard seatposts for compatibility with most bikes. And, with its height-adjustable backrest (up to 9 inches) and 11-inch wide by 9-inch long seat, you can sit back and enjoy great support and comfort. The vinyl cushions are nicely padded so you'll float over the bumps.

- One-piece resin body - Barefoot friendly rubber surface - Includes reflectors

- One-piece resin bodies - Barefoot-friendly rubber surfaces - Boron-steel axles - No reflectors - 400 grams/pair

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- DT Swiss cartridge bearings - Sold in pairs

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

- Dual spring saddle with chrome grab bar and vintage feel - Chrome front spring and dual rear springs offer a plush comfortable ride - Heavy duty vinyl top resists tearing and scuffs - Pillar style seat post clamp - 11.5" x 8.5"

• Fits most handlebars • 4-piece set • Durable, soft foam • Includes end plugs • 2x340mm 2x125mm

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

- Wide, self balancing exerciser pedals with a boron axle - Durable polypropylene composite body - 155 x 160mm platform size

- Alloy frame with Polypropylene body and inlaid TPE rubber tread - Entry-level upgrade for cruiser-style bikes - 7mm boron steel axle

- Imitation sheepskin - Foam padding - Fits cruiser and exerciser seats

- One-piece ABS resin body - Molded pins - 320g pair

- Alloy construction - Great for Cruiser or BMX bar conversions

- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm

• Fits one-piece cranksets • Steel construction • 44T • 3/32"

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction